Digital-surfacing-welding-machine
Product description:
TOOLS INCLUDE: This item is 2in1 welding machine (1 x Handheld
welding gun,1 x Foot Pedal ,1 x Power Line,1 x Forceps Clamp,1 x
Tungsten Needle ,1 x Pedestal ),Operation
USAGE - 1. Precisely position parts by tacking with the spot
welder; 2. Welding of necklaces with a diameter 0.3mm or
larger(smaller diameter may melt);3. Repair metal joints or breaks
without removing set stones or pearls;4. Repair heat sensitive
metals or metal alloys;5. Repair surface or entry point of a
molding of the same alloy
OPERATION - 1. Plug the device into the wall socket and turn it on;
2.Adjust input current by adjusting the current regulating dial to
start; 3.Clamp the object to be welded with the negative ground
electrode; 4.Insure you have arc welding eye protection in
place;5.Briefly step on the foot pedal and release
Adjust the output power according to the wire size,the welding work
piece is bright and clean, fast and efficient
Application:used for fast welding of platinum, gold , K gold ,
silver, steel and precision welding of wires like ends of circle ,
oval buckle, fine wire
NOTE:
1. Work environment :under conditions of ventilation, dryness,
coolness, and avoiding sun exposure.
2, non-metal products can not be welded
3, spot welding machine is mainly used for welding gold and silver
necklaces, earrings and other ring closure, not suitable for sheet
/ block workpiece use
4. The tip of the tungsten needle will be slightly worn during the
welding process, or a black stain will be attached to the surface.
It is recommended to sharpen or wipe it frequently.
5, the tip of the tungsten needle must be aligned with the gap of
the welding, otherwise the current will be biased, and the welding
effect will not be damaged, and other positions of the workpiece
will be damaged.
6. Please try not to touch the workpiece at the tip of the tungsten
needle during welding. If it is encountered, it will short the
machine and affect the service life of the machine.
7, the foot switch, can not always step on it, immediately release
the point, if not released in time will cause the machine short
circuit,
If the voltage is unstable, it is recommended not to use the
machine. Or use after installing the regulator.
| Specifications: |
| Voltage:220V | Power:200W |
| Weight:5KG/Set | Maximum current:30A |
| Package Includes: |
| 1 x DX-30A Welding Machine | 1 x Foot Pedal |
| 1 x Power Line | 1 x Forceps Clamp |
| 1 x Tungsten Needle | 1 x Pedestal |
| 1 x Handheld welding gun | |
Delivery :
